Headset Compatibility; Using The Headset; To Enable The Headset Mode At A Keyset - NEC DSX Feature Handbook

Features
106 | DSX |

Headset Compatibility

Have the privacy of a handset call without having to hold the handset.
You can utilize a customer-provided headset in place of the handset. Like using Handsfree, using the headset frees up your
hands for other work. However, the headset provides privacy not available from Handsfree.

Using the Headset

• If you are using the DSX Wireless Headset Adapter (WHA) with a Plantronics Wireless Headset System, refer
to the user guide provided with the WHA.
To connect a headset:
1. Plug a compatible headset into the telephone headset jack.
2. Leave the handset connected and in the cradle.
To turn the headset mode on and off:
1. Press the headset Feature Key on your telephone or DSS Console.
2. You can optionally push
While in the headset mode:
1. Do one of the following:
a) Press a line key to place or answer an outside call.
b) Press
INTERCOM
c) If on a call, press
2. Depending on how your extension is set up, you may hear incoming voice announcements while in the headset
mode.

To enable the Headset Mode at a keyset:

: Go to next selection.
Next
of current option.
Select the Headset Mode sub-menu.
+
Menu
91
On
Off
Back
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
+ +
Menu Options
to get Intercom dial tone.
to hang up.
SPEAKER
Enabling Headset Mode (Keyset)
: Go to previous selection.
Prev
: Exit Menu setup.
Exit
Turn the Headset Mode on.
Turn the Headset Mode off.
Go back to the previous level.
( + )
Headset Mode Menu 91
: Select current Option.
Select
http://www.renderx.com/
: Back out
Back