Line Keys; Using Your Line Keys - NEC DSX Feature Handbook

Features
124 | DSX |

Line Keys

Press a line key for one-touch access to an outside line.
A line key provides you with one-button access to a specific outside line. Just press a line key to place or answer a call on the
line. There is no need to dial codes to access or intercept outside calls. In addition, a line key provides a Busy Lamp Field
(BLF) for the line to which it is assigned (see the table below).
When the key is:
Off
On (red)
On (green)
Wink On (red)
Wink On (green)
Double Wink On (green)
Slow Flash (red)
Slow Flash (green)

Using Your Line Keys

To place a call using a line key:
1. Lift the handset.
2. Press the line key.
3. Dial the outside number.
To answer a call using a line key:
1. Listen for ringing and look for the flashing line key.
a) Line keys that flash red are for you and your co-workers.
b) Line keys that flash green are just for you (such as DILs and transfers).
2. Lift the handset.
3. Press the flashing line key.
a) If you have Ringing Line Preference, lifting the handset answers the call.
b) If you have Automatic Handsfree, while on a call you can press another line key to put your first call on Hold.
To set up Line Key ringing at your keyset:
: Go to next selection.
Next
of current option.
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Line Key BLF Indications
Setting Up Line Key Ringing (Keyset)
: Go to previous selection.
Prev
: Exit Menu setup.
Exit
The line is:
Idle or not installed
In use or on Exclusive Hold at a co-worker's extension
In use at your extension
On System Hold at a co-worker's extension
On System Hold at your extension
On Exclusive Hold or recalling your extension
Ringing into the system
Ringing or recalling directly to your extension
: Select current Option.
Select
http://www.renderx.com/
: Back out
Back