Park; Using Park At A Keyset - NEC DSX Feature Handbook

Hide thumbs Also See for DSX:
Table of Contents

Advertisement

Park

Park a call in orbit so a co-worker can pick it up. You don't have to locate a co-worker to handle their calls.
You can place an outside call in a waiting state (called a Park Orbit) so that a co-worker may pick it up. There are two types
of Park: System and Personal. Use System Park when you want to have the call wait in one of 10 system orbits (60-69). Use
Personal Park to Park a call at a co-worker's extension. After parking a call, you normally Page your co-worker to pick it up.
Your co-worker dials a code or presses a programmed System Park key to retrieve the call.
A call you Park too long will recall to you and then divert to other extensions in your system.
If you have a System Park key on your phone, the key shows you the status of the assigned system orbit.
When the key is:
Off
On (red)
Single wink on (green)

Using Park at a Keyset

To Park a call from a keyset:
1. Do one of the following for System Park.
a) Push
+
Park
b) Push the System Park Orbit key.
c) Press
TRANSFER
2. Do one of the following for Personal Park:
a) Push
Park
+
b) Press
TRANSFER
The line/loop key for the parked call winks on (green) at your extension.
To retrieve a parked call from a keyset:
1. Do one of the following for System Park.
a) Push the System Park Orbit key.
b) Press
INTERCOM
2. Do one of the following for Personal Park:
a) Press
INTERCOM
The line/loop key for the parked call winks on (green) at your extension.
b) Press the flashing line/loop key.
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Park Key Busy Lamp Indications
A co-worker has parked a call in the orbit assigned to the
The extension user has parked a call in the orbit assigned
+ Dial the System Park Orbit number (
Sys
+ Dial
+ Dial the System Park Orbit (
*
Pers
+ Dial the number of the extension at which you want to Park the call.
+ Dial
+ Dial the number of the extension at which you want to Park the call.
**
+ Dial
+ Dial the System Park Orbit (
*
+ Dial
+ Dial the number of the extension at which the call is Parked.
**
DSX |
The Park orbit is:
Idle
key.
to the key.
-
).
0
9
-
).
60
69
-
).
60
69
http://www.renderx.com/
Features
| 147

Advertisement

Table of Contents
loading

Table of Contents