Setting The Ringing Volume Preset - NEC DSX Feature Handbook

To set up Line Key ringing at your Super Display:
+ Select the Ring Assignments sub-menu.
Menu
Ringing
Select the Key Assignments sub-menu.
Key
A s s i g n m e n t s
Line
To assign a line key:
1. Push .
Menu
• Super Display: Push
• Keyset: Dial .
51
2. See Feature Keys on page 89for more.

Setting the Ringing Volume Preset

• This preset sets the default volume of your incoming ringing.
To set the ringing volume preset at a keyset:
: Go to next selection.
Next
of current option. : Exit Menu setup.
Exit
Select the Ringing Preset sub-menu.
+
Menu
11
Turn the default ringing volume down. The minimum setting is off.
Down
Turn the default ringing volume up.
Up
Save your entry and back up to the previous level.
Back
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Setting Up Line Key Ringing (Super Display)
Your line keys will light. Press a line key repeatedly to set its ringing mode:
• Always (key LED is on green)
• Night Ring (key LED flashes slow green)
• Delay Ring (key LED flashes fast green)
• Lamp Only (key LED is on red)
Dial a digit (0-4) to set the Ring Type:
for Standard
0
for Ring Type A
1
for Ring Type B
2
for Ring Type C
3
+
Key Assignment Feature Keys
Setting the Ringing Preset (Keyset)
: Go to previous selection.
Prev
.
: Select current Option.
Select
http://www.renderx.com/
Features
DSX | | 51
: Back out
Back