Message Waiting; Using Message Waiting - NEC DSX Feature Handbook

Features
132 | DSX |

Message Waiting

If your system doesn't have voice mail, use Message Waiting to leave a request for a return call.
You can leave a Message Waiting at a busy or unanswered extension requesting a return call. When you leave a Message
Waiting on a co-worker's phone, their
calls you.
Message Waiting ensures that you will not have to recall an unanswered extension. It also ensures that you won't miss calls
when your extension is busy or unattended.
You can leave Messages Waiting at any number of extensions. Also, any number of extensions can leave a Message Waiting
for you. Just scroll through your Messages Waiting and select a co-worker to call back.

Using Message Waiting

To leave a Message Waiting:
1. Place Intercom call to a co-worker.
a) The extension you call can be unanswered, busy, or in Do Not Disturb.
2. Press .
V-MAIL
3. Hang up.
To answer a Message Waiting:
1. Look at your
V-MAIL
2. Press INTERCOM
a) The system cancels the Message Waiting if the extension you call is busy, doesn't answer, or is Do Not
Disturb.
b) If the extension you call doesn't answer, press
c) If your
V-MAIL
To review your Messages Waiting and select a message for a return call:
1. Do not lift the handset.
2. Press
V-MAIL
3. Lift the handset and press
a) You can alternately press
b) The system cancels the Message Waiting if the extension you call is busy, doesn't answer, or is Do Not
Disturb.
c) If the extension you call doesn't answer, press
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
key and Ring/Message lamp flash. Answering their Message Waiting automatically
V-MAIL
key and Ring/Message Lamp - they should be flashing (red).
+ V-MAIL .
key and Ring/Message Lamp continue to flash you have additional messages waiting.
until the extension you want displays.
.
V-MAIL
instead of lifting the handset.
INTERCOM
to automatically leave them a Message Waiting.
V-MAIL
to automatically leave them a Message Waiting.
V-MAIL
http://www.renderx.com/