Replacing/Adjusting Fixed Anti-Tipper Swivel Caster; Installing/Adjusting Removable Anti-Tippers - Invacare Top End T-3 Tennis Adjustable Operating And Maintenance Manual

OPTIONAL ANTI-TIPPER
This Procedure includes the following:

Replacing/Adjusting Fixed Anti-Tipper Swivel Caster

Installing/Adjusting Removable Anti-Tippers

After ANY adjustments, repair or service and BEFORE use, make sure all
attaching hardware is tightened securely - otherwise injury or damage may
result.
REPLACING/ADJUSTING FIXED ANTI-TIPPER SWIVEL
CASTER
T-3 ELITE AND T-4 ELITE WITH FIXED CAMBER TUBE (FIGURE 1)
Replacement.
1. Lift UP on the quick-release handle.
2. Remove the existing rear swivel caster from the chair.
3. Install the new rear swivel caster into the fixed anti-tipper bar.
4. Adjust the rear swivel caster. Proceed to ADJUSTMENT in this procedure of the manual.
Fixed Anti-Tipper Bar
OPEN POSITION
Quick-Release Lever
CLOSED POSITION
FIGURE 1 - REPLACING/ADJUSTING FIXED ANTI-TIPPER SWIVEL CASTER
- T-3 ELITE WITH FIXED CAMBER TUBE
Adjustment.
If the rear wheel size, rear wheel camber or the position of the adjustable axle
camber bar is changed, the rear swivel caster MUST be readjusted to maintain
a 1/4 to 1/2-inch clearance between the bottom of the rear swivel caster and
the floor. Otherwise, injury or damage may occur.
1. If necessary, lift the quick-release handle UP to the open position.
2. Adjust the height of the rear swivel caster to to as close to the floor as possible.
3. Push the quick-release handle DOWN to the closed position.
Part No. 1054916
WARNING
WARNING
59
PROCEDURE 8
Rear Swivel Caster
1/4 to 1/2-inch
Clearance
T-3™ and T-4™ Series