Invacare Top End T-3 Tennis Adjustable Operating And Maintenance Manual page 38

PROCEDURE 6
Axle Tube Positioning For 0°/9°, 0°/12°, 3°/9°, 6°/9° , 3°/12° Or 6°/12°
Camber Inserts (FIGURE 9).
1. Open the camber clamps. Refer to OPENING/CLOSING CLAMPS in this procedure of the
manual.
2. Slowly rotate the axle tube until the stop on the opposite toe adjustment ring is positioned
at the opposite end of the frame bracket (approximately 1/8-inch).
QUICK RELEASE LEVERS - Make sure the quick release levers are pointing
towards the rear of the wheelchair and are in the CLOSED position BEFORE
using the wheelchair, otherwise personal injury or damage to the wheelchair
may result.
STANDARD - Make sure the hex screws and locknuts are securely tightened
BEFORE using the wheelchair, otherwise personal injury or damage to the
wheelchair may result.
3. Close the camber clamps. Refer to OPENING/CLOSING CLAMPS in this procedure of the
manual.
AXLE TUBE POSITIONING FOR 0°/9°, 0°/12°, 3°/9°, 3°/12°, 6°/9°
0°, 3° OR 6° CAMBER
Frame
Bracket
Axle Tube - Will
Rotate UP Only
Toe Adjustment
Ring
FIGURE 9 - ADJUSTING TOE IN/TOE OUT - DEGREE OF CAMBER HAS
T-3™ and T-4™ Series
WARNING
OR 6°/12° CAMBER INSERTS
Frame
Bracket
Toe Adjustment
Ring
Frame
Bracket
Toe Adjustment
BEEN CHANGED
38
9° OR 12° CAMBER
Toe Adjustment
Ring
Axle Tube - Will
Rotate DOWN Only
Ring
Part No. 1054916
WHEELS
Frame
Bracket