Invacare Top End T-3 Tennis Adjustable Operating And Maintenance Manual page 40

PROCEDURE 6
QUICK RELEASE LEVERS - Make sure the quick release levers are pointing
towards the rear of the wheelchair and are in the CLOSED position BEFORE
using the wheelchair, otherwise personal injury or damage to the wheelchair
may result.
STANDARD - Make sure the hex screws and locknuts are securely tightened
BEFORE using the wheelchair, otherwise personal injury or damage to the
wheelchair may result.
13. Make sure the quick release levers or hex screws and locknuts are securely tightened.
LOWER DEGREE OF CAMBER
Set Screw (STEP 2
Frame Bracket
Tab
(STEP 5 STEP 5 STEP 5 STEP 5) STEP 5
Metal Tab
STEP 5 STEP 5
(STEP 5 STEP 5) STEP 5
Axle Tube - Will Rotate UP Only
FIGURE 10 - ADJUSTING TOE IN/TOE OUT - AXLE TUBE IS MOVED
FROM FACTORY SET POSITION OR IS REPLACED
T-3™ and T-4™ Series
WARNING
HIGHER DEGREE OF CAMBER
STEP 2) STEP 2 STEP 2 STEP 2
Set Screw
Toe Adjustment (STEP 2 STEP 2 STEP 2) STEP 2
STEP 2
Ring (STEP 5 STEP 5 STEP 5 STEP 5) STEP 5
Axle Tube
Toe Adjustment
Axle Tube
Ring (STEP 5
Axle Tube - Will Rotate DOWN Only
40
Frame Bracket
STEP 5 STEP 5
STEP 5) STEP 5
Part No. 1054916
WHEELS
Metal Tab
STEP 5 STEP 5
(STEP 5 STEP 5 STEP 5)
Tab (STEP STEP STEP STEP STEP
5 5 5 5 5 )