FOOTREST
INSTALLING/USING FOOTREST - T-4 ELITE AND T-4 TITANIUM
1. Remove the hex screws from the mounting bracket.
2. Position the upper support tube on the underside of the wheelchair frame.
3. Position the mounting bracket on top of the wheelchair frame.
4. Install the hex screws to secure the mounting bracket to the wheelchair frame.
5. Repeat STEPS 1-4 to attach the upper support tube and mounting bracket to the other
side of the wheelchair.
6. Attach the single plate footrest/lower support tube attachment to the upper support
tubes.
7. Tighten the set screws.
8. If necessry, adjust footrest. Refer to ADJUSTING FOOTREST in this procedure.
Mounting Bracket
Footplate
Button Scew
FIGURE 2 - INSTALLING/USING FOOTREST - T-4 ELITE AND T-4
Part No. 1054916
Wheelchair Frame
Hex Screw
Set Screw
Locknut
TITANIUM
51
PROCEDURE 7
Upper Support Tube
Lower Support Tube
Footplate Mounting Bracket
T-3™ and T-4™ Series