Disengaging/Engaging Motor Lock Levers; Tdx Si/Tdx Si-2 Without Ssd Motors And All Tds Si With Ssd Motors - Invacare TDX SI User Manual

5.7

Disengaging/Engaging Motor Lock Levers

TDX SI/TDX SI-2 without SSD Motors and All TDS SI with SSD Motors

WARNING
DO NOT engage or disengage motor locks until the power is in the OFF position.
For this procedure, refer to FIGURE 13.

Motor lock disengagement/engagement allows free-wheeling or joystick controlled operation. Free-wheeling allows an
assistant to maneuver the wheelchair without power.
Motor lock levers are located between the rear caster assembly and drive wheel on both sides of the wheelchair.
1. Perform one of the following as if viewing the motors from behind the wheelchair (Detail "A"):
• Engage (DRIVE) - Move the motor lock levers DOWN to engage the motors and drive the wheelchair.
• Disengage (PUSH) - Move the motor lock levers UP to disengage the motors and push the wheelchair.
-
Rear
Caster
FIGURE 13 Disengaging/Engaging Motor Lock Levers - TDX SI/TDX SI-2 without SSD Motors and All TDS SI with SSD Motors
Part No 1154294

Wheelchair without SSD motors shown.
Drive Wheel DISENGAGE MOTOR (Push) -
Motor Lock Lever
Move Motor Lock Lever UP
59
5 WHEELCHAIR OPERATION
ENGAGE MOTOR (Drive) -
Move Motor Lock Lever DOWN
Motor Lock Lever
Invacare® TDX®SI Series