Invacare TDX SI User Manual page 58

5 WHEELCHAIR OPERATION
Required Items:
TOOL
Battery Charger
1. Attach the battery charger connector to the charger port on the joystick.
2. Plug the charger's AC power cord, or extension, into the grounded 120 VAC wall outlet.
3. Wait until charging is complete.
 Allow eight hours for normal charging. Larger batteries (greater than 55 ampere-hours) or severely discharged batteries
may require up to sixteen hours to be properly charged and equalized.
It is advantageous to recharge frequently rather than only when necessary. In fact, a battery's life is extended if the charge
level is maintained well above a low condition.
If the batteries need to be charged more often or take longer to charge than normal, they may need to be replaced.
Contact an Invacare dealer for service.
SPJ+, SPJ+ w/PSS and
SPJ+ w/ACC Joysticks
Charger/
Programming
Port
Invacare® TDX®SI Series
QUANTITY
1
CMPJ+ Joystick
Charger/
Programming
Port
(On Front of
Joystick)
FIGURE 12 Charging Batteries
58
COMMENTS
Supplied
Display
Charger/
Programming
Port
(On Back of
Display)
Mini-Display
Charger/
Programming
Port
(On Back of
Display)
Part No 1154294