Table of Contents
Advertisement
When Using Closeup Lens
Use the closeup lens in the optional accessories to measure a fine surface. For the
attachment of the closeup lens, refer to the instruction manual for the closeup lens.
If the closeup lens is attached, the measurement value must be compensated for the lens
transmittance. This compensation coefficient is attached to the closeup lens. Use the data
management software CS-S0w Professional supplied with the CS-2000 as standard to
set the coefficient in this instrument. After that, when the closeup lens is selected as lens
type, the measurement value compensated with the compensation coefficient can be
obtained. See instruction manual of CS-S0w for details.
The wrong setting of lens type leads to inaccurate measurement.
Do not use the closeup lens with the ND filter. It leads to inaccurate measurement.
* Lens type
: STANDARD, CLOSE-UP
* Factory default setting : STANDARD
Operation Procedure
1
1
. Press MENU key when the MEAS
screen is displayed.
The MENU screen appears.
When the backlight of the LCD has been turned
off via BACKLIGHT key on the MEAS screen,
the backlight is turned on.
2
. Press either
[OPTION] and then press ENTER
key.
The MENU – OPTION screen appears.
The current set contents are displayed in the
[LENS] item.
6, 7
or
key to select
43
2, 3, 4, 5
M E A S
S N G L
U C 0 0
Lv
35. 93
x
0 . 3968
y
0 . 4060
Obs
SPD
SYNC
L E N
ND
2˚
Nr m
I n t
S t d
N o n
M E N U
MEAS
MEMORY
T A R G E T
O P T I O N
S E T U P
M E N U
O P T I O N
U S E R . C A L
NON
L E N S
STD
ND-F I L T E R
NON
T 0 1
c d
2
m
BL
o n
Advertisement
Table of Contents
