Refilling With Staples; Refilling Finisher Staples - Toshiba E-Studio 2330c Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE

Refilling With Staples

Refill with staples according to the following procedures when the staples in the stapler of the Finisher and Saddle Stitch
unit ran out.
P.54 "Refilling Finisher staples"
P.59 "Refilling Saddle Stitch unit staples"

Refilling Finisher staples

Finisher MJ-1101
1
Open the front cover of the Finisher.
2
Remove the staple cartridge.
3
Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as shown in the
figure.
4
Fit a new staple case on the staple cartridge.
Push the staple case hook into the staple cartridge socket until you
hear a click.
54

Refilling With Staples