Toshiba E-Studio 2330c Troubleshooting Manual page 41

1.TROUBLESHOOTING FOR THE HARDWARE
5
Holding the knob, raise the guide, and return it to its
original position.
6
Fit the staple cartridge into the stapler.
When putting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket will not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
7
Close the front cover of the Finisher.
Saddle Stitch Finisher MJ-1030 (optional)
1
Open the front cover of the Finisher.
2
Remove the staple cartridge.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 39