EL (Electroluminescent) Mylar Removal and Replacement
Connecting the Transceiver Housing to Flip/PCB Assembly
58
3.
Connect the Hinge flex. Note: Do not close flip. This may cause Hinge to lock
up if over traveled.
Figure 49.
Equipment/Material:
• 1 Rear Housing
• 1 Flip/PCB assembly
1.
Horizontally place Rear housing into the Hinge barrel of the flip/PCB assembly.
Figure 50.
March 06, 2006
U6 GSM
060308o
060307o
6809493A67-O