Level 1 and 2 Service Manual
Removing and Replacing the Flip Assembly
6809493A67-O
1.
Remove the battery cover, battery, SIM, front and rear housing, and
transceiver board assembly as described in the procedures.
2.
Remove 2 T3 Plus screws located near the hinge and 2 T6 screws near the top
of the flip assembly (see Figure 16). Set the screws aside for reuse.
Figure 16. Removing the Flip Assembly Screws
March 06, 2006
T3 Plus Screw
T6 Screw
T3 Plus Screw
T6 Screw
Disassembly
040957o
35