Removing And Replacing The Front And Rear Housings - Motorola U6 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Front and Rear Housings

G
6809493A67-O
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, and SIM as described in the procedures.
2. Using a Torx driver with a T-6 bit, remove the 2 machine screws and the 2 self
tapping screws on the rear housing (see Figure 4).
Self-Tapping
Screw Location
Self-Tapping
Screw Location
Figure 4. Removing the Rear Housing Screws
March 06, 2006
Machine Screw Location
Machine Screw Location
Disassembly
050099o
23