Disassembly
Removing and Replacing the Camera Assembly
G
40
1.
Remove the battery cover, battery, SIM, antenna, rear housing, transceiver
board assembly, flip assembly, and flip CLI lens assembly as described in the
procedures.
The FPC (flex) is easily damaged. Exercise extreme care when handling.
2.
Use the disassembly tool to pry the camera assembly from its socket (see
Figure 22).
Camera Assembly
Disassembly
Figure 22. Camera Assembly Removal
3.
Carefully lift the camera assembly away from the flip assembly.
4.
To replace, carefully press the camera assembly flex connector into its socket
on the display assembly until fully seated.
5.
Replace the flip display assembly, flip assembly, flip display lens, transceiver
board assembly, front and rear housing assembly, SIM, battery, and battery
cover as described in the procedures.
March 06, 2006
Tool
Flip Assembly
U6 GSM
050448o
6809493A67-O