Removing And Replacing The Keypad Keys; Removing The Flip Assembly - Motorola V150 Service Manual

Dual band wireless telephone

Hide thumbs Also See for V150:

Table of Contents

Disassembly

Removing and Replacing the Keypad Keys

Remove the battery cover, battery, antenna, light guide, rear housing, and

transceiver board as described in the procedures.

Lift the keypad keys from the front housing as shown in Figure 16.

Front Housing

Figure 16. Removing the Keypad Keys

To replace, insert the keypad keys into the front housing, ensuring the keys

align properly with the openings in the front housing.

Replace the transceiver board, rear housing, light guide, antenna battery, and

battery cover as described in the procedures.

There are no Level 1 or 2 replaceable parts in the V150 telephone flip assembly. The

flip assembly is not removable from the front housing at Level 1 and 2 Service

Centers. Refer service to an authorized Level 3 or higher Center.

August 20, 2003

Keypad

6809471A67-O

V150

031800o

Table of Contents