Level 1 and 2 Service Manual
ment
Connecting the Side Button Flex Grommet to Flip Assembly
6809493A67-O
1.
Insert grommet in the hinge barrel opening. Align the locating feature inside
of hinge barrel (fig. 2) with cut out area in grommet (fig. 3).
Figure 44.
2.
Verify Flex is towards the inside of the hinge barrel as shown below.
Figure 45.
March 06, 2006
EL (Electroluminescent) Mylar Removal and Replace-
060291o
060314o
55