Level 1 and 2 Service Manual
Removing and Replacing the Flip Display Assembly
G
6809493A67-O
1.
Remove the battery cover, battery, SIM, antenna, rear housing, transceiver
board assembly, keypad assembly, flip display lens, and flip assembly, as
described in the procedures.
2.
Turn the flip assembly over to reveal the CLI lens.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
3.
Use the disassembly tool to unseat the display assembly flex connector from
its socket on the flip assembly. Also loosen and lift the flex ground tab from the
display assembly (see Figure 18).
Display Assembly
Display Assembly
Flex Connector
Figure 18. Removing the Flip Display Flex Connector
March 06, 2006
Disassembly
Disassembly Tool
050420o
37