Removing And Replacing The Rear Housing - Motorola A1000 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Rear Housing

G
6809490A77-O
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
To Remove the Rear Housing
1. Ensure the phone is off.
2. Remove the battery door.
3. Remove the battery.
4. Remove the USIM.
5. Using a driver with a T-6 Torx Plus bit, remove the 8 screws that secure the
rear housing to the front housing (see Figure 7).
Figure 7. Removing the Rear Housing
October 4, 2004
Disassembly
Screw
Locations
21