Accessories; Firescreen; Floor Bracket Kit; Stove -Top Thermometer - Jøtul F3 USA Installation And Operating Instructions Manual

USA/Canada

8.0 Accessories

Many accessories have been manufactured for use with
the Jøtul F 3. Only use accessories that are specifically
designed for the Jøtul F 3.
Firescreen (part # 350168)
The Jøtul F 3 has been approved for use as an open fireplace,
with front door open. This feature is especially nice when
the ambience of a fire is desired. Some care should be taken
when operating the stove as a fireplace.
• Always have the firescreen in place, attached to the
stove front.
• Never over load the stove, for the best appearance burn
in the traditional three log configuration.
• Reminder, when burning the stove with the screen in
place, you are sacrificing efficiency for aesthetics, and
you will be consuming wood at a much faster rate.
Warning: Operate your Jøtul F 3 with the front door fully
open and the firescreen in place or fully closed. A partially
opened door may result in overfiring. Also, if the door is left
partly open, gas and flame may be drawn out of the stove
opening, creating risks from both fire and smoke.
Floor bracket kit (part # 750304)
The optional floor bracket kit can be used in the event
the stove needs to be secured to the floor. Complete
installation instructions and diagrams are supplied with
each floor bracket kit.
Stove-top thermometer (part # 5002)
Jøtul recommends the use of a magnetic stove-top
thermometer to monitor the surface temperature of the
stove. The optimum surface temperature range for the
most efficient, clean burn is between 400° and 600°.
18