Using fax/scan functions
3
Using fax/scan functions
3.1
General fax/scan operation
Note
For details on performing fax and scan operations, refer to the User's Guide [Network
Scan/Fax/Network Fax Operations].
!
Detail
Specify the fax settings and network settings and register destinations before entering Enlarge Display
mode. For details, refer to the User's Guide [Network Scan/Fax/Network Fax Operations] and the
User's Guide [Network Administrator].
This section contains information on the general operation for sending faxes and scans.
1
Press the [Fax/Scan] key in the control panel, and then press the [Enlarge Display] key.
The Fax/Scan mode screen appears in Enlarge Display mode.
2
Position the original to be copied.
–
For details on positioning the original, refer to page 1-10.
3
Specify the destination.
–
For details on specifying destinations, refer to page 3-5.
–
To erase the entered destination, press the [C] (clear) key.
4
Specify the necessary scanning settings.
–
For details on specifying scanning settings, refer to page 3-13.
–
To cancel the setting and select the default, press the [Reset] key.
751/601
3
3-3