3
1
Touch the Job History tab.
The Job History list appears.
2
Select the desired destination.
–
The last five destinations where a transmission was sent are displayed.
–
To cancel a selection, touch the button for a selected destination again.
3.2.3
Selecting a destination with an LDAP search
Follow the procedure described below to search in the LDAP server and select the destination.
!
Detail
In order to perform an LDAP search, LDAP must be enabled and an LDAP server must be registered.
For details on specifying LDAP settings, refer to the User's Guide [Network Administrator].
3-8
Using fax/scan functions
751/601