Installing/Removing The Safety Flag - Invacare Lynx L-4 User Manual
Invacare scooter owner's operator and maintenance manual
Hide thumbs
Also See for Lynx L-4:
- Owner's operator and maintenance manual (52 pages) ,
- User manual (6 pages) ,
- Parts catalog (20 pages)
Table of Contents
Advertisement
12 ACCESSORIES
12.3 Installing/Removing the Safety Flag
WARNING
The installation of the safety flag onto the back of the scooter seat significantly increases the length of the scooter. When
turning the scooter or swiveling the scooter seat, it is important to take note of this increased length - otherwise, injury
and/or damage to the surrounding property may result.
For this procedure, refer to FIGURE 12.3.
Installing
1.
Install the bracket into the accessory tube located on the back of
the seat.
2.
Install mounting knob to secure the bracket in place. Securely
tighten.
3.
Install safety flag into bracket.
Removing
1.
Remove the safety flag from the bracket.
2.
Remove the mounting knob that secures the bracket in place.
3.
Remove the bracket from the accessory tube located on the back
of the seat.
Lynx™L-3 & Lynx L-4 Scooters
Accessory Tube
Bracket
FIGURE 12.3 Installing/Removing the Safety Flag
48
Mounting Knob
Safety Flag
Insert Into Accessory
Tube
Part No. 1143205
Hide quick links:
Advertisement
Table of Contents
