Removing/Installing The Battery Box - Invacare Lynx L-4 User Manual
Invacare scooter owner's operator and maintenance manual
Hide thumbs
Also See for Lynx L-4:
- Owner's operator and maintenance manual (52 pages) ,
- User manual (6 pages) ,
- Parts catalog (20 pages)
Table of Contents
Advertisement
10.2 Removing/Installing the Battery Box
For this procedure, refer to FIGURE 10.2 on page 39.
The battery box is held in place with hook and loop strips.
Removing
1.
Turn power off and remove the key from the ignition.
2.
Remove the seat. Refer to Removing/Installing the Seat on page 23.
3.
Hold the battery box handle and lift the battery box up and away from the scooter (Detail "A").
Installing
1.
Turn power off and remove the key from the ignition.
2.
Remove the seat. Refer to Removing/Installing the Seat on page 23.
3.
Holding the battery box handle, carefully lower the battery box on to the battery tray in the scooter (Detail "B").
4.
Press down the battery box to engage the connector on the battery box (not shown) with the connector on the scooter base (Detail "B").
5.
Reinstall the seat. Refer to Removing/Installing the Seat on page 23.
DETAIL "A"
Battery Box
Part No. 1143205
Handle
Battery Box
FIGURE 10.2 Removing/Installing the Battery Box
DETAIL "B"
Battery Tray
39
10 BATTERIES
Connector on Base
Lynx™L-3 & Lynx L-4 Scooters
Hide quick links:
Advertisement
Table of Contents
