Description - Shindaiwa BP35 Owner's Manual

1. Angle transmission - Having two gears to change the
angle of rotating axis.
2. Shaft tube - Part of the unit that provides a casing for
power transmission shaft.
3. Safety decal - Part number X505-005890
4. Front handle - Handle located towards the cutting
device.
5. Ignition switch - Device for connecting and
disconnecting the ignition system and thus allowing the
engine to be started or stopped.
6. Throttle latch - Device for temporality setting the throttle
in a partially open position to aid starting.
7. Throttle trigger - Activated by the operator's finger for
controlling the engine speed.
8. Rear handle - Handle located towards the knapsack
power unit.
9. Flexible shaft assembly - Flexible tube for the power
transmission shaft.
10. Throttle cable

Description

11. Air cleaner cover - Covers air filter.
12. Spark plug
13. Fuel tank - Contains fuel and fuel filter.
14. Fuel tank cap - For closing the fuel tank.
15. Sylinder cover
16. Shoulder harness - Used to support unit on operator's
back.
17. Silencer cover - Cover the silencer not to make operator
touch to hot surface of silencer.
18. Operator's Manual - Included with unit.
Read before operation and keep for future reference to
learn proper, safe operating techniques.
19. Tools - 13 x 19 mm T-wrench (combination screwdriver
/ spark plug socket), 4 mm and 5 mm hexagonal
wrenches.
20. Goggles
21. Shield - Device to protect the operator from accidental
contact with the cutting head and thrown objects.
Shield support and four bolts.
Guard plate - For nylon line head.
Device to protect the operator from accidental contact
with the cutting head and thrown objects.
Cut off knife; Cut nylon line to adjust line length to proper
swath.
15