Product Description
Using the illustration as a guide, familiarize your-
self with your machine and its various compo-
nents. Understanding your machine helps ensure
top performance, long service life and safer
operation.
1 - Outer tube
2 - Gearcase
3 - Blade
4 - Cutting attachment shield
WARNING!
Do not make unauthorized
modifications or alterations to this unit
or its components.
Specifications
Length/Width/Height
Weight
Gearcase Lubrication
Gear Reduction
Gearcase Arbor Size
*Specifications are subject to change without notice.
Prior to Assembly
Before assembling, make sure you
have all the components required for a
complete unit:
■
Brushcutter Attachment
■
Barrier Bar (1)
■
5x35 Screws (4)
■
5mm Nuts (4)
■
Hanger Bolt (1)
Multipurpose
Brushcutter Tool
2
3
■
Split Pin 20x22 (10)
■
Hanger Nut
■
Hanger
■
Shoulder Harness
■
Manual del Operador
■
Assembly Tool (s)
■
Carefully inspect all compo-
nents for damage.
1
4
904 x 254 x 147 mm (35.6 x 10.0 x 5.8 in)
1.55 kg (3.43 lb)
Lithium based grease
1.57:1
10 mm Left-hand thread
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front" and
"rear" refer to directions as viewed by the
operator during normal operation.
IMPORTANT!
5