Product Description; Specifications - Shindaiwa HomePro 22C Owner's/Operator's Manual

Product Description

22C Brushcutter
Gearcase
Cutting
Attachment
Figure 4
Using the accompanying illustrations as a guide, familiarize
yourself with this unit and its various components. Under-
standing this unit helps ensure top performance, long service
life, and safer operation. See Figure 4.
Specifications
Engine Model .......................................................................................................S220
Engine Type .....................................................2-cycle, vertical-cylinder, air-cooled
Dry Weight, 22C (excluding cutting attachment) ........................... 5.1 kg/11.2 lb.
Bore x Stroke ............................................................. 31 mm x 28 mm/1.22" x 1.10"
Displacement ................................................................................21.1 cc/1.29 cu. in.
Maximum Power Output ..................................................................... 0.8 hp/0.6 kw
Transmission Type .........................Automatic, centrifugal clutch with bevel gear
Fuel ..........................................................................Gasoline/Oil mixture, 50:1 with
Fuel Tank Capacity .....................................................................510 cc/17.2 ounces
Carburetion ........................................................................ Walbro WYL (w/primer)
Ignition ................................................................... Electronic, transistor controlled
Spark Plug ............................................................................................. NGK BMR6A
Air Cleaner ...........................................................................................Foam Element
Starting Method ................................................................................................ Recoil
Stopping Method .................................................Sliding Switch (Grounding Type)
Handle .................................................................................. Double Grip Handlebar
Specifications subject to change without notice
6
Throttle Trigger
Outer Tube
Cutting Attachment Shield
Shindaiwa Premium 2-cycle Engine Oil
Ignition Switch
Grips
Harness
Handlebar
WARNING!
Do not make unauthorized modifications or alterations
to this unit or its components.
Prior to Assembly
Before assembly, make sure you have all
the components required for a complete
unit:
 Engine assembly.
 Outer tube assembly.
 Cutting attachment shield with mounting
hardware.
 Handlebar kit with mounting bracket.
 Shoulder strap.
 Tool kit including: 4 mm hex wrench,
combination spark plug/screwdriver,
8-10 mm open end wrench and this
owner's/operator's manual.
Carefully inspect all components for
damage.
Spark
Cylinder
Plug
Cover
Air Cleaner
Fuel Tank