Planet FNSW-2400PS User Manual page 49

The page includes the following fields:
Object
• Port No.
• Priority (0~240)
• Root Path Cost
(1~200,000,000)
• Port No.
• RPC
• Priority
• State
• Status
• Designated Bridge
• Designated Port
Table 4-24 Descriptions of the STP Port Settings Configuration Screen Objects
Description
Allow choosing one port of POE Web Smart Ethernet Switch for further
management, the available options is 01 to 24.
Decide which port should be blocked by setting its priority as the lowest.
Enter a number between 0 and 240.
The value of priority must be the multiple of 16.
The cost of the path to the other bridge from this transmitting bridge at the
specified port.
Enter a number 1 through 200,000,000.
Default value is Auto.
The switch port number of the logical STP port.
Root Path Cost. For the Root Bridge this is zero. For all other Bridges, it is
the sum of the Port Path Costs on the least cost path to the Root Bridge.
Display current priority for each port.
The current STP port state. The port state can be one of the following
values:
Alternate
Back Up
Root Port
Designated Port
The current STP port status. The port status can be one of the following
values:
Listening
Blocking
Learning
Forwarding
ID of the STP gridge who designated the root port
Port number of the bridge from where the bridge designated the root port
User's Manual of FNSW-2400PS
- 49 -