Dhcp Relay Agent - Planet FNSW-2400PS User Manual

• Type
• Operation Key
• Time Out
• Activity

4.9 DHCP Relay Agent

This function provides DHCP Relay Agent of POE Web Smart Ethernet Switch; the screen in
Table 4-27 descriptions the DHCP Relay Agent of POE Web Smart Ethernet Switch.
Allow to selects port trunk type from POE Web Smart Ethernet Switch, the
available options are LACP and Static. Default mode is LACP.
The LACP operation key must be set to the same value for ports that
belong to the same LAG.
Range: 1-65535;
Default Link Group 1: 1
Default Link Group 2: 2
The time out configuration mode command assigns an administrative
LACP timeout. To reset the default administrative LACP timeout use the
no form of this command
Long Time Out
Short Time Out
Default mode is Short Time Out.
Allow link group to automatically sends LACP protocol packets or not.
Default mode is Passive.
Table 4-26 Descriptions of the Trunk Setting Screen Objects
Figure 4-43 DHCP Relay Agent Web Page Screen
User's Manual of FNSW-2400PS
, the available options are shown as below:
Figure 4-43 appears and
- 53 -