Hardware Description; Front Panel; Led Indicators; Rear Panel - Planet FNSW-2400PS User Manual

This product provides two different running speeds – 10Mbps and 100Mbps in the same POE Web Smart Ethernet Switch
and automatically distinguishes the speed of incoming connection.
This section describes the hardware features of FNSW-2400PS. For easier management and control of the
FNSW-2400PS, familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the
unit LED indicators. Before connecting any network device to the FNSW-2400PS, read this chapter carefully.

2.1 Front Panel

The Front Panel of the FNSW-2400PS consists of 24x Auto-Sensing 10/100Mbps Ethernet RJ-45 Ports
The LED Indicators are also located on the front panel of the POE Web Smart Ethernet Switch.

2.1.1 LED Indicators

System
LED Color
PWR Green
Per 10/100Base-TX, PoE interfaces (Port-1 to Por-24)
LED Color
LNK/ACT
Green
PoE In-Use
Orange
1. Press the RESET button once. The POE Web Smart Ethernet Switch will reboot automati-
cally.
2.
Press the RESET button for 5 ~ 10 seconds. The POE Web Smart Ethernet Switch will back to
the factory default mode; the entire configuration will be erased.

2.2 Rear Panel

The rear panel of the POE Web Smart Ethernet Switch indicates an AC inlet power socket, which accepts input power from
100 to 240VAC, 50-60Hz, 2A.
Figure 2-1: FNSW-2400PS Switch Front Panel
Indicate that the Switch has power.
Lights
Lights: Indicate the link through that port is successfully established.
Indicate the Switch is actively sending or receiving data over that port.
Blink:
Lights: Indicate the port is providing 48VDC in-line power.
Indicate the connected device is not a PoE Powered Device (PD).
OFF:
Figure 2-2: FNSW-2400PS Switch rear panel
User's Manual of FNSW-2400PS

2. HARDWARE DESCRIPTION

Function
Function
- 10 -