Table of Contents
Advertisement
7.4
O
W
T
THER
AYS
Memory Transmission
Documents are automatically stored in memory and sent to a
remote station. Use this feature to send your documents to
multiple locations. After transmission, the documents are
automatically erased from the memory.
1
Feed the document(s) face down into the ADF.
2
Adjust the document settings if necessary. For details, see
"Adjusting Document Settings" on page 4.4.
3
Press Menu and then
TX" appears on the display, then press Enter.
4
Enter the number of the remote machine using the number
keypad.
To enter the number, you can also press a one-touch
button, or press Speed/Status and enter a speed dial
number including a group dial number.
5
Press Enter to confirm the number. The display asks you to
enter another fax number to send the document.
N
: A single broadcast (sending to multiple destinations) is
OTE
available for your product, so the "ANOTHER NO." prompt does not
appear if any broadcast is currently set up and is not completed.
6
To enter another fax number, select "1.YES" and repeat
from step 4. You can add up to 25 destinations.
Note that you cannot use Group dial numbers for another
fax number.
7
To send to one location or when you complete the last fax
number setting, select "2.NO".
8
The document will be scanned into the memory before
transmission. The LCD display shows the memory capacity
and the number of pages being stored in the memory.
9
The product begins sending the document in order of the
numbers you entered.
F
O
AX
or
repeatedly until "MEMORY
Advertisement
Table of Contents
