Table of Contents
Advertisement
Copying a Document
Using the ADF(Automatic Document Feeder), you can load up to
30 documents in one job. Ensure documents are in good
condition, have the same thickness and weight, and that all
staples and paper clips have been removed.
1
Feed the document (up to 50 pages) face down into the ADF
and adjust the document guides to the document size.
2
Press Copy/Start to enter the copy mode.
3
Customise the copy settings including copy contrast,
number of copies, and copy size if necessary. See "Setting
Copy Options" on page 3.12.
4
If necessary, you can use special copy features such as
collation and duplex copy.
5
Press Copy/Start to begin copying. The display shows the
copy processing.
Note: If you want to cancel the copy job, press Stop/Clear
during copying or pull out the document from the ADF before
Copy/Start button.
pressing
C
3.11
OPYING
3
Advertisement
Table of Contents
