Table of Contents
Advertisement
Setting Copy Options
After you access the copy mode, you can set the following
options for the current copy job.
Image
Image setting is used to select the text type for the current copy
job. To select the image type, take the following steps:
1
2
3
Contrast
You can adjust the contrast for an original document containing
paint markings or dark images.
To adjust the contrast, take the following steps:
1
2
3.12
C
OPYING
Press Image. You can see the current setting on the
bottom line of the display.
Press Image repeatedly or use the navigation buttons to
change the setting. You can choose from:
TEXT: Use for documents containing mostly text.
MIXED: Use for documents with mixed text and graphics.
PHOTO: Use when the originals are photographs.
Press Enter to save the selection.
In the Copy mode, press Contrast.
Press Contrast repeatedly or use the navigation buttons to
change the setting. You can choose from 5 contrast
settings.
Each time you press the button, the selection block on the
display moves to the left or to the right. As the selection
block moves to the right, the contrast becomes darker.
Selection block
Advertisement
Table of Contents
