Table of Contents
Advertisement
3-7 Memory Clear
3-7-1 Memory Clear in User Mode
In the user mode, you can selectively clear
information stored in this machine's memory. T h e
list of data you can clear is as follows:
1 : SYSTEM ID : your terminal ID number and name
a re e r a s e d f rom the machine's memory.
2 : SYSTEM DATA : re s t o res user-selectable options
to the default value.
3 : P H O N E B K / D E L AY : clears the One-Touch,
Speed Dial, or Group Dial numbers stored in
memory. In addition, all the delayed time
operations you have reserved are also canceled.
4 : TX-RX JOURNAL : c l e a r s a l l record s o f
transmissions & receptions.
1 . If the machine is in the tech mode, return to the
user mode by pressing Menu, #, 1, 9, 3, 4 i n
sequence.
2 . P re s s Menu, a n d 'Memory Clear' o n t h e
one-touch keypad.
The LCD displays the type of memory you can
choose.
3 . S c roll to the options by pressing „ o r
you find the one you want to clear. When the
cursor blinks under the memory you want to
c l e a r, p re s s Enter.
Otherwise, you can enter the number of the
memory.
4 . The LCD prompts you to confirm your selection.
P re s s 1 to choose 'YES'.
Samsung Electronics
3-7-2 Memory Clear in Tech Mode
Memory clear, contained in the tech mode, is used
f o r c l e a r i n g a l l t h e u s e r's data in memory and
se t ti n g t o de f au l t s ta tu s .
1 . If not in the tech mode, Pre s s Menu, #, 1, 9, 3, 4
in sequence to initiate the tech mode.
2 . P re s s Menu, a n d 'Memory Clear' o n t h e
one-touch keypad.
Depending on country, you may be asked to
select the country before clearing memory. S e l e c t
the country when the display prompts to.
Then, the LCD displays 'M E M O RY A LL CLEAR'
on the one-touch keypad.
3 . P re s s 1 to clear all memory.
If you want to cancel, pre s s 2. The machine
r eturns to Standby Mode.
u n t i l
Setup and Installing
3-19
Advertisement
Table of Contents
