Table of Contents
Advertisement
LCD Error Messages
Display
BYPASS JAM
DOCUMENT JAM
DOOR OPEN
DRUM WARNING
DUPLEX JAM
DRUM EMPTY
FUSER ERROR
LINE ERROR
LSU ERROR
MEMORY FULL
Meaning
The product detects non
feeding from the bypass
tray.
The loaded document
has jammed in the ADF.
The side cover is not
securely latched.
The drum cartridge is
near the end of life.
Paper has jammed in the
middle of 2-sided
printing.
The drum cartridge is out
of life.
There is a problem in the
fuser unit.
Your product cannot
connect with the remote
machine, or has lost
contact because of a
problem on the phone
line.
A problem has occurred
in the LSU (Laser
Scanning Unit).
The memory is full.
Solution
Load paper in the bypass tray.
Clear the document jam. See
page 10.2
Close the side cover until it locks
in place.
You should have a replacement
cartridge in stock.
Clear the jam. See page 10.10
Replace the drum cartridge. See
page 9.7
Unplug the power cord and plug it
back in. If the problem still
persists, please call for service.
Try again. If failure persists, wait
an hour or so for the line to clear,
then try again.
Or, turn the ECM mode on. See
"System Data Options" on
page 8.5.
Unplug the power cord and plug it
back in. If the problem still
persists, please call for service.
Either delete unnecessary
documents, or retransmit after
more memory becomes available,
or split the transmission into more
than one operation.
T
ROUBLESHOOTING
10
10.13
Advertisement
Table of Contents
