Table of Contents
Advertisement
2.6 Power over Ethernet Powered Device
3~5 watts
6~12 watts
10~12 watts
3~12 watts
3~12 watts
30 watts
Since the FGSD-910P / FGSD-910HP per PoE port supports 48V /
56V DC PoE power output, please check and assure the Powered
Device's (PD) acceptable DC power range is from 48V / 56V DC.
Note
Otherwise, it will damage the Powered Device (PD).
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where
UPS is installed for un-interrupt power system and power
control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory
and Warehouse can install the Access Point anywhere
with no hesitation.
IP Surveillance
Enterprise, Museum, Campus, Hospital, and Bank can
install IP Camera without limits of installation location. It
needs no electricians to install AC sockets.
PoE Splitter
PoE Splitter splits the PoE 48V DC over the Ethernet
cable into 5/12V DC power output. It frees the device
deployment
from
locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
High Power PoE Splitter (FGSD-910HP only)
High PoE Splitter split the PoE 56V DC over the Ethernet
cable into 24/12V DC power output. It frees the device
deployment
from
locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
High Power Speed Dome (FGSD-910HP only)
This state-of-the-art design is considerable to fit in
various
network
environments
shopping malls, railway stations, warehouses, airports,
and production facilities for the most demanding outdoor
surveillance applications- no need electrician to install AC
sockets.
restrictions
due
to
restrictions
due
to
like
power
outlet
power
outlet
traffic
centers,
17
Advertisement
Table of Contents
