Per 10/100Mbps Port
LED
Color
LNK/ACT
Green
PoE
Orange
Per 10/100/1000Mbps Port
LED
Color
Speed
Green
LNK/ACT
Green
2.2 Rear Panel
The rear panel of the PoE Ethernet Switch indicates an AC inlet power socket,
which accepts input power from 100 to 240V AC, 50-60Hz, 2A (FGSD-910P) or
100 to 240V AC, 50-60Hz, 2.5A (FGSD-910HP).
10
Light: Indicates the link through that port is successfully
established at 10/100Mbps full duplex mode.
Blink Slowly: Indicates the link through that port is
successfully established at 10/100Mbps
half duplex mode.
Blink Fast: Indicates that the switch is actively sending
or receiving data over that port.
Light: Indicates the port is providing 48V (FGSD-910P) /
56V (FGSD-910HP) DC in-line power.
Light: Indicates the link through that port is successfully
established at 1000Mbps.
Blink Slowly: Indicates the link through that port is
successfully established at 100Mbps.
Off: Indicates the link through that port is successfully
established at 10Mbps.
Light: Indicates the link through that port is successfully
established.
Blink: Indicates that the switch is actively sending or
receiving data over that port.
Figure 2-3: FGSD-910P Switch Rear Panel
Function
Function
100~240V AC
50/60Hz, 2A max.