VPN Broadband Router User manual
Windows 2000 Server Configuration
Configuration is the same as for Example 2: Windows 2000/XP Client to except for specifying the Source and Desti-
nation addresses for the "Filter Properties". Instead, for both IP Filters, the Filter Properties- Addressing should be
completed as follows.
The Source Address should be set to "A specific IP Subnet", and the IP address and Subnet mask set to the
address range used on the VPN Broadband Router's LAN.
The Destination Address should be set to "A specific IP Subnet", and the IP address and Subnet mask set to the
address range used on the Windows 2000 LAN.
Figure 81: Windows 2000 Server – Addressing
94