Table of Contents
Advertisement
VPN Broadband Router User manual
Properties
Allow connec-
tion
Login Name
Login Pass-
word
Verify Pass-
word
Button
Clear Form
Add as New
User
Update Se-
lected User
Use this to enable or disable access by this user, as required.
Enter the login name. The remote user must provide this name
when they connect. The name must not contain spaces, punctu-
ation, or special characters.
Enter the login password. The remote user must provide this
password when they connect.
Re-enter the password above.
Use this to prepare the form for a new entry. Any existing data
will be cleared.
Use this to save the data in the "Properties" area as a new entry.
(If a user is selected in the "Existing User" list, the selection is
ignored.)
Use this to update the data for the user selected in the Existing
User list. To change an existing user's data, follow this proce-
dure.
1. Select the desired user in the Existing Users list. Their
information will be displayed in the Properties panel.
2. Change the data in the Properties panel as required.
3. Click the Update Selected User button to save your changes.
104
Advertisement
Table of Contents
