Table of Contents
Advertisement
VPN Broadband Router User manual
8. Enter the Source IP address and the Destination IP address.
Since this is the outgoing filter, the Source IP address is "My IP address" and the Destination IP address is the
address range used on the remote LAN.
Ensure the Mirrored option is checked.
9. Click "OK" to save your settings and close this dialog.
10. On the resulting screen (above), ensure the "To DUT" filter is selected, then click the Filter Action tab to see a
screen like the following
Figure 57: Filter Properties: Addressing
Figure 58: New Rule Properties: IP Filter List
82
Advertisement
Table of Contents
