Table of Contents
Advertisement
15. Click the Tunnel Setting tab, then select The tunnel endpoint is specified by this IP address. Enter the WAN (Inter-
net) IP address of the VPN Broadband Router, as shown below.
16. Click the Authentication Methods tab, then click the "Edit" to see the screen like the example below.
17. Select Use this string to protect the key exchange (preshared key), then enter your preshared key in the field
provided.
18. Click "OK" to save your changes and return to the Authentication Methods tab of the Edit Rule Properties screen.
19. Click "Close" to return to the DUT to Win2K properties screen. The "To DUT" filter should now be listed, as shown
below.
Figure 63: Tunnel Setting
Figure 64: Authentication Method
85
Microsoft VPN
Advertisement
Table of Contents
