LevelOne FBR-1430 User Manual page 127

VPN Broadband Router User manual
Port Number
Allow Remote
Access
To connect from a remote PC via the Internet
1. Ensure your Internet connection is established, and start your Web Browser.
2. In the "Address" bar, enter "HTTPS://" followed by the Internet IP Address of the VPN Broadband Router. If the
port number is not 80, the port number is also required. (After the IP Address, enter ":" followed by the port num-
ber.)
e.g.
HTTPS://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.

Have your ISP allocate you a Fixed IP address.

Use the DDNS feature (Internet menu) so you can connect
using a Domain Name, rather than an IP address.
Enter a port number between 1024 and 65535. The default for
HTTP connections is port 80, and for HTTPS port 443. Using
either of these is NOT recommended. The default value is
8080.
The port number must be specified in your Browser when you
connect, as explained above.
This allows you to restrict remote access by IP address. Select
the desired option.

Everyone - Remote user's IP address is not checked.

IP address range - Only IP addresses in the range speci-
fied will be allowed. If selected, you must enter both the
Start and Finish IP address.

Only this PC - Only the specified IP address is allowed. If
selected, you must enter an IP address in the field pro-
vided.
122