Table of Contents
Advertisement
VPN Broadband Router User manual
2. Complete this screen.
Name
Subject Name
Hash Algorithm
Signature Algorithm
Signature Key
Length
IP address
Domain Name
E-mail Address
3. Click "Next" to continue to the following screen.
4. Check that the data displayed in the Certificate Details section is correct. This data is used to generate the Certifi-
cate request. If the data is not correct, click the "Back" button and correct the previous screen.
5. If the data is correct, copy the text in the Data to supply to CA panel
(including "
-----BEGIN CERTIFICATE REQUEST-----
and "
-----END CERTIFICATE REQUEST-----
6. Click Finish to return to the Self Certificates screen.
Your request will be listed under Self Certificate Requests.
7. Apply for a Certificate:
Enter a name which helps to identify this particular
certificate. This name is only for your reference, it is not
visible to other people.
This is the name which other organizations will see as
the Holder (owner) of this Certificate. This should be
your registered business name or official company
name. Generally, all Certificates should have the same
value in the Subject field.
Select the desired option.
Select the desired option. RSA is recommended.
Select the desired option. Normally, 1024 bits provides
adequate security.
Enter your public (Internet) IP address.
This is optional. If you have a domain name, enter it
here.
This is optional. If you have permanent E-mail address,
enter it here.
Figure 86: Self Certificate Request (2)
"
") to a new document in a text editor such as Notepad, and save the file.
98
Advertisement
Table of Contents
