Explanation Of Lights - DeLonghi Magnifica Evo ECAM29 6 Series Instructions For Use Manual

11. Empty the container used to collect the water from the
first rinse. Remove and empty the water tank, then fill
with fresh drinking water up to the MAX level (fig. 48) and
reinstate the softener filter, if in use; return the tank to the
machine and reposition the container under the spouts;
12. Press the button (which blinks rapidly) to start the
rinse: the strong intensity Led blinks to indicate that step
3 of the descale cycle is in progress; the rinse fluid will
flow from the hot water spout; (*)
Step 4: Completion of descale
procedure
13. When the Led relative to the pre-ground function lights
up, the descale cycle has been correctly terminated;
14. The indicator of the grounds container (C4)lights up:
remove the container in which the rinse water is collect-
ed and empty it; take out the drip tray and empty the
grounds container, where part of the rinse water will have
been collected. Reposition all the parts in the machine.
15. The "no water" indicator (C2)lights up: remove the tank
and fill with fresh drinking water. Reposition the water
tank in the machine.
The machine is ready for use.
Please note:
• After descaling, it is normal for the grounds container to
contain water.
• (*) If the water tank has not been filled to the MAX level,
at the end of descaling, the appliance requests a third
rinse to guarantee that the descaler solution has been
completely eliminated from the machine's internal cir-
cuits. In this instance, repeat step 3 from point 11.

17. EXPLANATION OF LIGHTS

Indicator/Led
Drink indicators blinking
Drink and settings indicators
permanently alight
Meaning
The machine is warming up:
wait
The machine is ready for
use: select the desired drink
and relative options
Replace the filter (see
section "4. Water softener
filter")
→
Indicator/Led
20
Meaning
Insufficient water in tank:
fill the tank
The water tank is missing, or
is not positioned correctly:
ensure the tank is correctly
in place
General alarm: the inside of
the machine is very dirty.
Clean the machine thor-
oughly. If the message is
still displayed after cleaning,
contact De'Longhi Customer
Services and/or an approved
Service Centre
The infuser has not been
replaced after cleaning:
reinstate the infuser as
described in section "15.
Cleaning the infuser"
No coffee beans: fill the
beans container, then press
any button to exit the alarm
condition.
A selection has been made
using pre-ground coffee
without putting the coffee
in the relative funnel (A3)
→