Installation Instructions For Intel® Pentium® 4 Mpga478 Clips - Intel Pentium 4 mPGA478 Installation Manual

Installation Instructions for Intel ® Pentium
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU(Figure1-1). Figure 1-2 showing the correct
installation of the cooler atop the CPU.
Figure 1-1 Figure 1-2
Figure 2
C
Clip introduction--
B
A Part A: Secured to the retention mechanism hook.
Part B: Tightly contact the cooler bracket.
Figure 2
Part C: Secured to the retention mechanism hook.
Figure 3
Secure Parts A, B, and then C of the clip to the retention
mechanism. Assure that Part C is secured to the retention
mechanism hook on the same side as the heat pipes.
Figure 3-1 Figure 3-2
Figure 4
Repeat the steps in "Power Installation and 3.5"
Fan Speed Controller Installation (Figure 2-1~Figure 4-2)".
Figure 4 The installation is now completed.
- 10 -
GH-PDU21-MF
® 4 mPGA478 Clips