Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Installation Instructions for Intel
Figure 1-1
Figure 1-2
C
B
A
Figure 2
Figure 3-1
Figure 3-2
Figure 4
GH-PDU21-MF
®
Pentium
®
4 mPGA478 Clips
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU(Figure1-1). Figure 1-2 showing the correct
installation of the cooler atop the CPU.
Figure 2
Clip introduction--
Part A: Secured to the retention mechanism hook.
Part B: Tightly contact the cooler bracket.
Part C: Secured to the retention mechanism hook.
Figure 3
Secure Parts A, B, and then C of the clip to the retention
mechanism. Assure that Part C is secured to the retention
mechanism hook on the same side as the heat pipes.
Figure 4
Repeat the steps in "Power Installation and 3.5"
Fan Speed Controller Installation (Figure 2-1~Figure 4-2)".
The installation is now completed.
- 10 -
Advertisement
Chapters
Table of Contents
