Installation Instructions For P4 Lga775Rm & Cooler - Intel Pentium 4 mPGA478 Installation Manual

Installation Instructions for P4 LGA775RM & Cooler
ARM
Side A
Side B
CAM
Figure 1
Place the LGA775RM onto the LGA775 motherboard so that
side A is parallel with ARM and side B is parallel with CAM.
Figure 1
Figure 2
From the underside of the motherboard, use screws (4) and
plastic washers (4) together to secure the LGA775RM into
place..
Plastic
Washers Figure 3
Figure 2
Gently push down on the cooler unit to lock it into position.
(Figure3-1).Repeat the steps in "Power Installation and 3.5"
Fan Speed Controller Installation (Figure 2-1~Figure 4-2)".
The installation is now completed.
GH-PDU21-MF provides manual fan speed control function. The
fourth pin of the 4-pin CPU fan header does not necessarily have
to be connected (Figure 3-2).
Note: About P4 Clips installation, please refer to "Installation
Figure3- 1 Figure3-2
Instructions for Intel
- 9 -
To install GH-PDU21-MF on LGA775
motherboard needs both LGA775 RM & P4
clips.
Please add an adequate layer of heat sink
paste on the surface of the CPU.
® Pentium ® 4 mPGA478 Clips"
GH-PDU21-MF